Vacuum cups for swimming pools, suction cups for water fitness equipment

Suction cup Ø60 EPDM with M8 stainless steel screw vulcanized inside.

Excellent for any vacuum application in the atmosphere as well as dipped in fluids such as water and chlorine or sea water.

Ventose per vuoto, piscine e attrezzature sportive

Hydro bikes

Ideal for the hydro bike activity, the Effegomma’s suction cups permit to hold the aqua bike steady to the bottom of the swimming pool.



Strong and resistant, they allow a perfect adherence also to the heaviest fitness equipment such as the treadmill.

Tapis roulant


For the lovers of Aqua Step, the suction cups for swimming pool are the ideal solution to hold the equipment well steady to the bottom of the pool.


Acqua Pole

Ideal to practice Aqua Pole in the swimming pool, they make the equipment extremely steady and anchored to the flooring.

Acqua pole

Suction cup with full vacuum chamber

Maximum grip ensured within minimum space, 60mm diameter and 25mm height only, M8x25 or M8x20 stainless steel screw moulded inside the rubber.
Highly recommended for tapis roulant, aquabike, and aquastep.

Ventose a camera grande per piscine

Suction cup with half vacuum chamber

Born for dropping the full chamber grip of 60%, it has the same geometry of the previous one, and it's mainly used for easing the lift of heavy equipment.

Ventose a camera ridotta per piscine

Supporting foot

This is the last evolution of the half vaccum chamber suction cup: it has a flat surface on the bottom hence no grip at all. Used in combination with the other suction cups it ensures the easiest way to lift any equipment.
In fact the user, will easily pick-up the equipment from the side of the flat foots and the remaining suction cups will lose their grip through leverage effect.

piedino di appoggio
Ventosa per mattonelle a mosaico

Suction cup for mosaic tiles

This very unique product is made by a specific rubber which can adapt to mosaic surfaces with small tiles such as 1x1cm, or even next to edges.
It has enough grip to be safely used while compressed from the equipment's weight, and it prevents any slippery effect where all the other suction cups can't work because of the holes between tiles.

Complete resistance to the water

The Effegomma’s suction cups can be immersed in water and chlorine or sea water ensuring a total resistance and a complete adherence.

resistenza all'acqua


The EPDM rubber distinguish itself for the ability of maintaining its characteristics unchanged over time, ensuring longevity.

Adherence to mosaic floors

Effegomma realizes special suction cups that permit a perfect adherence to the mosaic floors.

pavimento mosaico

The Effegomma’s suction cups are realized to fit every customers’ needs.

Recoil rubber pads

This special category includes weapon products.

weapon recoil

Shock-absorber recoil rubber pad

They are made of NBR rubber, which protects the recoil rubber pad from aggressive agents such as oils or resins

Standard recoil rubber pad

The combination of strength and softness of the article and the type of rubber used, makes it good- looking long-lasting and functional, besides it soaks up most of the thrust released in the recoil, after firing.

rubber recoil pad

Rubber buffers

Effegomma rubber buffer covers lots of market areas:

automotive, woodworking,  marble, aluminum, glass machineries.

Rubber buffers
paracolpi in gomma geometria


Each of them has a customized geometry according to the client's requirements and can be made in all of the available elastomeric materials, depending on working conditions, say:

presence of oils, glues and weathering.


They can be made only in rubber, or rubber and metal or even rubber and plastic material cold bonded, a technique Effegomma has used for over 25 years.

Industrial gaskets, rubber and other materials

Effegomma manufactures highly customized rubber seals, silicone seals, polyurethane seals in several different shapes and sizes, in compliance with technical specifications and customer's design

In particular, we produce:

Lip seals, o-rings, rubber bellows, silicone seals, EPDM rubber and polyurethane, Viton® seals.

rubber seals

Customized geometries

Effegomma seals allow the coupling between different mechanical parts that do not fit perfectly.
Above all, they counteract any irregularity due to the molding process.

Natural rubber lip seals

On customer's request are available in natural rubber to meet any type of technical needs.

Natural rubber lip seals

Seal for suction cup working with glass

Made of 100% pure natural rubber, they can be stretched 6 times their initial length and heavily compressed without causing any permanent deformation. They have an excellent grip due to the chemical nature of the compound, letting the user to run any tools on the glass faster than any other rubber, plus it has a good resistance against cuts caused by the sharp edges of the glass itself.

Seal for suction cup working with glass
EPDM lip seals

EPDM lip seals

Made of EPDM rubber enable high resistance to atmospheric factors and heat.

Cogged seals

For suction cup on plastic or aluminum body.

They are made for assembly with plastic or aluminum parts.

Guarnizione dentata

Rubber pads for conveyor chain.

Effegomma manufactures rubber pads and bumper rubber platesfor coating conveyor chains.

Pads have an aluminum or iron core and are coated by various materials: NBR, NR, EPDM.

We produce pads for chains most commonly used on the market.

Chain links from 5/8 of an inch up to 1.5 inches.

rubber plates

Chamfered track pads

This unique item is made to ease the exit of exceeding material from any working process with any materials:
all the holes on the rubber and the chamfers on the aluminum prevent any deposit of powder, oil... on the pad itself, ensuring that it will always work on the same height level and with a steady measure.
Of course depending on the customer’s request we can cover the pads with different rubber compound.

piastra smussata
Piastra per catena trasportatrice in plastica e gomma


The fixation on the chain is via rivets, steel pins, or plastic fit pressure.

Piastra in gomma per nastro trasportatore


In addition to the vulcanized and grinded pad, Effegomma may assemble the whole chain and provide the finished product.


Chains can be up to 20 meters long and are mounted on edgebanders and gluing machines.


Numerous applications are found in woodworking machineries.

Questo sito utilizza cookie, anche di terze parti, per migliorare la tua esperienza e offrire servizi in linea con le tue preferenze. Chiudendo questo banner, scorrendo questa pagina o cliccando qualunque suo elemento acconsenti all’uso dei cookie. Se vuoi saperne di più o negare il consenso a tutti o ad alcuni cookie, leggi l'informativa.